3 Easy Solutions to increase your boards looseness /responsiveness

Problem: A stiff and unresponsive board that is difficult to turn, especially top and bottom turns as with cutbacks.

Try the following in sequence indicated

1:  Push the centre fin  in 1 mm increments towards the nose of the board

    (“fore”) and, if still required push the side fins back towards the         

     tail of the board “aft”). This has the effect of clustering the fins together, making the board easier to turn, or

2:  Increase the outer splay of the fins and/or

3:  Increase the toe-in of the side fins

If you still require more manoevrability, tying installing a smaller set of fins.